« BACK  

Dust free powdering of cables

For product diameters ranging from 0.5 to 120mm
For product diameters ranging from 0.5 to 120mm

The machine model RSC from Rolf Schlicht was designed for an even, finely doseable and absolutely dust free powdering of cables, wires, hoses, profiles with powders like talc, stearate, lac powder and swellable powder.

Due to the electrostatic charging of the powder, a strong adhesive power on the product and a very even layer on the surface is achieved. The electrostatic also makes sure that no powder will fall from the product outside of the dusting chamber. Depending on extrusion speed and product diameter one alternatively two 100 kV powder guns are used.

Schlicht delivers machines for product diameters from 0.5-120mm. The machine will be manufactured corresponding to the desired extrusion speed.

In the machine there is a fluidised powder hopper out of which the powder is sucked by pneumatic venturi pumps and blown to the guns. The power of the electrostatic charging from 0-100 kV, the powder quantity and the speed of the dust cloud, is easily adjustable.

Depending on the product the powder gun can be equipped with different powder nozzles. There is a fully automatic and maintenance-free filter system consisting of three compact filter elements which are no longer cleaned off pneumatically.

Thanks to this filter system a strong and constant vacuum is generated in the machine, so that no powder will escape into the surrounding area.

Inlet and outlet openings of the dusting chamber do not have to be sealed by brushes. If there is not enough space in the line to place the machine, a free-standing dusting chamber, which is connected to the machine by a 3m long hose, can be added.

For an extremely fine powdering of slowly running products, an optional fine dosing device can be added to make sure that only a minimum powder quantity is transported to the guns.

PUBLISHED: 15 Mar 08 Bookmark and Share
Rolf Schlicht GmbH
Visit Rolf Schlicht GmbHs website
+49 40 679 9420
+49 40 679 94211
Other News from Rolf Schlicht GmbH:

Powder coating machine Model RSC
RSC Powder Coating Machine Model RSC
Rolf Schlicht GmbH at wire 2014
Rolf Schlicht at wire Russia 2013
Electrostatic powder coating machine model RSC
Electrostatic powder coating from Schlicht
Electrostatic powder coating
Electrostatic powder coating
Dust free powdering of cables

Industry News:
Jonathan Moia joins Cable Tapes UK Ltd
Further expansion imminent at Cable Tapes UK as Jonathan Moia is taken on to drive the company to even higher levels!
Cable Tapes UK, UK
Cimteq Ltd has been awarded silver accreditation against the Investors in People Standard, demonstrating their commitment to high performance through good people management
Cimteq Ltd recognised as an Investor in People
Cimteq Ltd, UK
Northwire's <i>BioCompatic</i> extends biocompatibility compliance
Northwire's BioCompatic extends biocompatibility compliance
Northwire Inc, USA
Metalube launches new range of Lubricool™ at wire Düsseldorf. Image shows Lubricool™ selector chart
Metalube launches new range of Lubricool™ at wire Düsseldorf
Metalube Limited, UK
The recently developed magnetic power gripper grips plate material from 6 mm and is suitable for robot applications and as a lifting magnet
Magnetic power gripper handles heavy steel parts
Goudsmit Magnetics Group, Netherlands
Cable Tapes UK will be exhibiting at wire 2018, Düsseldorf
Cable Tapes UK at wire 2018, Düsseldorf
Cable Tapes UK, UK
Cable Tapes UK are delighted to announce the launch of their new website
Cable Tapes UK are delighted to announce the launch of their new website
Cable Tapes UK, UK
VICAFIL SL lubricant
Clean wires with CONDAT wet drawing lubricants
Condat SA, France
John Mainwaring - Senior Development Chemist
Metalube appoint Senior Development Chemist
Metalube Limited, UK
Metalube is making a big investment into the Düsseldorf show this year with the addition of the new stand at Tube 2018
Two stands for Metalube in Düsseldorf
Metalube Limited, UK