Fine metal wire drawing

PUBLISHED: 12 Feb 09

LZDM-80/21 precious metal thin wiredrawing machine
LZDM-80/21 precious metal thin wiredrawing machine

Shanghai Lizhi Machinery Co Ltd is specialised in the research and development of micro-fine and fine metal wire drawing and annealing equipment for precious metal, non-ferrous metal, ferrous metal and stainless steel.

1. LZDM-80/21 wiredrawing machine is suitable for drawing extremely thin, precious metal wire rod.

The maximum inlet diameter is 0.12mm with a minimum finished wire diameter of 0.015mm. Machine speed is 600 metres per minute.

The drawing process is completely automatic, with a PLC-programmed control system. Ten pre-programmed operations can be stored. 2. LZDM-480/01 is suitable for drawing extremely thin, precious metal wire rod bus bar.

The maximum inlet wire diameter is 8mm with a minimum finished wire diameter of 1.5mm. The machine speed is 50-80 metres per minute.

This single-drum wiredrawing machine gradually decreases the wire diameter by threading wires through one die until the target wire diameter is reached. Settings such as drawing speed and traverse pitch can be set up for every process via a touch panel on the 10.4" colour touch screen.

Shanghai Lizhi Machinery Co Ltd, China (PR)
Tel: + 86 21 5284 4398
Email: shedon12150@yahoo.com.cn
Web: www.sh-lizhi.com

More news from this company:
Fine metal wire drawing