« BACK  

Breakthrough in tension control technology

Wire and cable makers have an affordable way to monitor and control tension in individual wires on rotating machines. This technology, from FMS, is called Radio Transmitted Tension Monitoring (RTM).

An RTM System can be easily applied on most planetary or tube stranders, bunchers, twisters, or any rotating machinery. It sends the signals by radio transmission thus avoiding the many drawbacks of mechanisms such as slip rings (cost, wear, signal noise, installation issues) and telemetry systems (unidirectional analogue data trans� mission, multi-positional prohibitive cost). RTM technology is secure and stable using industry standard Blue� Tooth technology for signal transmission.

The RTM System equipment packages can be configured in various ways to handle nearly any tension measurement or control task. The monitoring system is comprised of tension sensors, tension measuring amplifiers, a bus system with radio transceiver, and software. All of the components are specially designed by FMS for rotating applications (not effected by centrifugal and coriolis forces based on accelerations up to 40g). A wide range of tension sensors are available for any tension requirement, and if closed loop control is required, digital controllers are used instead of measuring amplifiers.

The RTM rechargeable battery power pack option comes in three different sizes (and power duration), includes a power monitoring system, and is easily combined with the signal transmitter on one plate for easy mounting. The transmitter sends the power signal to the PC for on�screen display of the remaining battery life.

Battery life depends on the number of sensor positions on the machine but the battery power packs are designed to produce a minimum of 1 shift of power (8 hours). The batteries are completely rechargeable, reusable, and changeable in only a few seconds.

The RTM System can easily be used with existing equipment as it bolts down in a small footprint, utilises standard FMS load cells and amplifiers, and runs on PC software so a new PLC installation is not required to utilise the system.

The RTM System digitally monitors tension in real time on up to 32 individual positions and displays the values on a PC screen. The software also includes data logging for each position and records minimum and maximum values for quality assurance purposes. There is also an option available to log data based on feet or metre measurements.

Tension control is easy utilising the PC or an output card. The amplifiers or controllers can be parameterised from the PC. Controller parameters can be adjusted from the PC while the machine is running. The system can be set-up to provide a warning signal or output or stop the machine immediately in case of a wire break. The RTM System can pay for itself typically in one to two years by reducing material breaks and eliminating overstressing and excessive slack in wires and cables. Therefore overall finished product throughput is increased.

The RTM System also improves the overall quality of the products produced and can open a wire and cable manufacturer up to new markets that demand documented and verifiable manufacturing condition products. There are several RTM systems currently in operation throughout the world.

The RTM is the first radio transmitted system in the world designed specifically for the wire and cable industry. It was developed by FMS Force Measuring Systems AG, a Swiss company that designs and manufactures precision devices and systems for tension measurement and control in the wire and cable industry, especially for rotating machinery applications.

The company, founded in 1993, has offices in Switzerland, Germany, Italy, the UK, and the USA.

PUBLISHED: 12 Feb 09 Bookmark and Share
FMS Force Measuring Systems AG
Visit FMS Force Measuring Systems AGs website
+41 44 852 8080
+41 44 850 6006
Other News from FMS Force Measuring Systems AG:

RTM X2.MP - a new wireless encoder signal transmission system
A competitive advantage through radio based wire tension control
Wire tension monitoring in stranding machines - successful machine upgrades in India
RTM X32 - a sophisticated range of wire tension measuring solutions
At the forefront of cable & wire production with FMS’ new RTM X2
Tension control - wireless and with digital speed
At the Forefront of Cable & Wire Production with FMS Sensors
Tension Control - Wireless and with Digital Speed
Breakthrough in tension control technology
Breakthrough in tension control technology from FMS Force Measuring Systems AG

Industry News:
Jonathan Moia joins Cable Tapes UK Ltd
Further expansion imminent at Cable Tapes UK as Jonathan Moia is taken on to drive the company to even higher levels!
Cable Tapes UK, UK
Cimteq Ltd has been awarded silver accreditation against the Investors in People Standard, demonstrating their commitment to high performance through good people management
Cimteq Ltd recognised as an Investor in People
Cimteq Ltd, UK
Northwire's <i>BioCompatic</i> extends biocompatibility compliance
Northwire's BioCompatic extends biocompatibility compliance
Northwire Inc, USA
Metalube launches new range of Lubricool™ at wire Düsseldorf. Image shows Lubricool™ selector chart
Metalube launches new range of Lubricool™ at wire Düsseldorf
Metalube Limited, UK
The recently developed magnetic power gripper grips plate material from 6 mm and is suitable for robot applications and as a lifting magnet
Magnetic power gripper handles heavy steel parts
Goudsmit Magnetics Group, Netherlands
Cable Tapes UK will be exhibiting at wire 2018, Düsseldorf
Cable Tapes UK at wire 2018, Düsseldorf
Cable Tapes UK, UK
Cable Tapes UK are delighted to announce the launch of their new website
Cable Tapes UK are delighted to announce the launch of their new website
Cable Tapes UK, UK
VICAFIL SL lubricant
Clean wires with CONDAT wet drawing lubricants
Condat SA, France
John Mainwaring - Senior Development Chemist
Metalube appoint Senior Development Chemist
Metalube Limited, UK
Metalube is making a big investment into the Düsseldorf show this year with the addition of the new stand at Tube 2018
Two stands for Metalube in Düsseldorf
Metalube Limited, UK