« BACK  

At the Forefront of Cable & Wire Production with FMS Sensors

The RMGZ Force Sensors for Wire Processing Applications
The RMGZ Force Sensors for Wire Processing Applications

With the RMGZ Series of Force Measurement Rollers and the NEW 309 Series of digital electronics, FMS continues the tradition of developing innovative system solutions for Tension Monitoring in rotating applications. When used together the system provides improved product quality, increased production rates, increased operator convenience, and allows for high data connectivity.

The RMGZ Force Sensors for Wire Processing Applications are available in four configurations:

RMGZ100: These Sensors are used to measure the tension in thin ropes, cables, wires, and fibers. The product is ideal where space is limited, and is available in six Nominal Force Ratings ranging from 6N to 300N for lighter tension requirements.

RMGZ300:This dedicated measuring roller family was developed specifically for use in higher RPM rotating applications where the special design effectively compensates for centrifugal and Coriolis forces. It is available with Nominal Force Ratings ranging from 50N to 1000N.

RMGZ400: The RMGZ400 and RMGZ600 Series Sensors utilize an enhanced bending beam RMGZ600 principal. These products are available with a Nominal Force Rating ranging from 60N to 4000N for medium tension requirements.

RMGZ800: This series of Force Measurement Rollers are used to measure the tension in heavy ropes, cables, and steel wires and are available in eight Nominal Force Ratings ranging from 100N to 8000N for higher tension applications.

All variants of the RMGZ Force Measuring Rollers offer an Overload Protection Rating of 10 times the Nominal Force Rating and a 20:1 Force Measuring Range. The sensors are constructed of stainless steel, incorporate a full Wheatstone bridge strain gauge, and include an aluminium cover for corrosion resistance.

The NEW 309 Series of digital electronics are the ideal complement to the full FMS product line of Force Measuring Sensors. All units are available in Wall, DIN Rail, and Panel mount versions, and include standard features such as Ethernet interface, automatic offset compensation and calibration, and a fast 1ms cycle time. Products include the EMGZ309 Single Channel Amplifier for total tension monitoring and the CMGZ309 PID Wire Tension Controller.

PUBLISHED: 09 Jul 10 Bookmark and Share
Company:
FMS Force Measuring Systems AG
Visit FMS Force Measuring Systems AGs website
Country:
Switzerland
Tel:
+41 44 852 8080
Fax:
+41 44 850 6006
Email:
info@fms-technology.com
Website:
www.fms-technology.com
Other News from FMS Force Measuring Systems AG:

»
RTM X2.MP - a new wireless encoder signal transmission system
»
A competitive advantage through radio based wire tension control
»
Wire tension monitoring in stranding machines - successful machine upgrades in India
»
RTM X32 - a sophisticated range of wire tension measuring solutions
»
At the forefront of cable & wire production with FMS’ new RTM X2
»
Tension control - wireless and with digital speed
»
At the Forefront of Cable & Wire Production with FMS Sensors
»
Tension Control - Wireless and with Digital Speed
»
Breakthrough in tension control technology
»
Breakthrough in tension control technology from FMS Force Measuring Systems AG


Industry News:
David Lee will fully retire from Metalube in August 2018
Metalube bids farewell to David Lee
Metalube Limited, UK
Wire cleaned for decorative finish by PWC system
Wire green cleaning for plating and a decorative glossy finish
Decalub, France
Klaus Lenz - CEO of Ungerer Technology GmbH
Klaus LENZ has been appointed as the CEO of UNGERER Technology GmbH
Ungerer Technology GmbH, Germany
The cover page of
Digitized wire & cable manufacturing - The "NIEHOFF Magazine" 1/2018 is out now
Maschinenfabrik Niehoff GmbH & Co KG, Germany
Magnet assemblies can now be fabricated quickly and efficiently using a robot
Robot for magnet assemblies
Goudsmit Magnetics Group, Netherlands
From top: Multiwire drawing line type MMH 121 + RM 161; D 632 type double twist bunching machine; NPS double spooler type SV 402 D; 
Rotary braiding machine BMV 16 ; Rotary braiding machine BMV 16 (interior)
Digitization - Niehoff at wire 2018
Maschinenfabrik Niehoff GmbH & Co KG, Germany
The Strand Compaction Units are available for 2mm to 40mm strand diameters
Rope strand compaction gives Bar Products & Services a first quarter boost
Bar Products & Services Ltd, UK
Ridgway are manufacturers of precision taping and winding machines for the electrical and energy industries
Ridgway Machines moving forward and expanding
Ridgway Machines Ltd, UK
Wire & Plastic Machinery booth from Wire Expo 2016
Wire and Plastic Machinery at Wire Expo 2018
Wire & Plastic Machinery Corp, USA
Domino (Wiedenbach) will be showcasing intelligent coding and marking solutions at wire 2018 in Düsseldorf, Hall 12, Stand 12E72
Industrial coding and marking solutions for demanding production environments
Wiedenbach Apparatebau GmbH, Germany
» VIEW ALL NEWS «