« BACK  

Electrostatic powder coating machine model RSC

Electrostatic powder coating machine model RSC
Electrostatic powder coating machine model RSC

Rolf Schlicht's electrostatic powder coating machine model RSC was designed for an even, finely dosable and absolutely dust free powdering of cables, wires, hoses, profiles with powders like talc, stearate, lac powder, swellable powder etc.

Depending on extrusion speed and product diameter one up to four powder guns of 100 kV each are used.

In the machine there is a fluidised powder hopper out of which the powder is sucked by pneumatic venturi pumps and blown to the guns.

You can adjust the power of the electrostatic charging from 0-100 kV, the powder quantity and the speed of the dust cloud. Depending on the product the powder gun can be equipped with different powder nozzles.

In the machine there is a fully automatic and maintenance free filter system which is cleaned off by a special process. Thanks to this filter system a strong and constant vacuum is generated in the machine, so that no powder will escape into the ambient - guaranteed.

For little space we deliver a free standing dusting chamber which is connected to the machine by hoses. For an extremely fine powdering of slowly running products we offer as an option a fine dosing device to make sure that only a breath of powder is transported to the guns. Further options available.

PUBLISHED: 30 May 12 Bookmark and Share
Company:
Rolf Schlicht GmbH
Visit Rolf Schlicht GmbHs website
Country:
Germany
Tel:
+49 40 679 9420
Fax:
+49 40 679 94211
Email:
info@schlicht-gmbh.de
Website:
www.schlicht-gmbh.de
Other News from Rolf Schlicht GmbH:

»
Powder coating machine Model RSC
»
RSC Powder Coating Machine Model RSC
»
Rolf Schlicht GmbH at wire 2014
»
Rolf Schlicht at wire Russia 2013
»
Electrostatic powder coating machine model RSC
»
Electrostatic powder coating from Schlicht
»
Electrostatic powder coating
»
Electrostatic powder coating
»
Dust free powdering of cables


Industry News:
Jonathan Moia joins Cable Tapes UK Ltd
Further expansion imminent at Cable Tapes UK as Jonathan Moia is taken on to drive the company to even higher levels!
Cable Tapes UK, UK
Cimteq Ltd has been awarded silver accreditation against the Investors in People Standard, demonstrating their commitment to high performance through good people management
Cimteq Ltd recognised as an Investor in People
Cimteq Ltd, UK
Northwire's <i>BioCompatic</i> extends biocompatibility compliance
Northwire's BioCompatic extends biocompatibility compliance
Northwire Inc, USA
Metalube launches new range of Lubricool™ at wire Düsseldorf. Image shows Lubricool™ selector chart
Metalube launches new range of Lubricool™ at wire Düsseldorf
Metalube Limited, UK
The recently developed magnetic power gripper grips plate material from 6 mm and is suitable for robot applications and as a lifting magnet
Magnetic power gripper handles heavy steel parts
Goudsmit Magnetics Group, Netherlands
Cable Tapes UK will be exhibiting at wire 2018, Düsseldorf
Cable Tapes UK at wire 2018, Düsseldorf
Cable Tapes UK, UK
Cable Tapes UK are delighted to announce the launch of their new website
Cable Tapes UK are delighted to announce the launch of their new website
Cable Tapes UK, UK
VICAFIL SL lubricant
Clean wires with CONDAT wet drawing lubricants
Condat SA, France
John Mainwaring - Senior Development Chemist
Metalube appoint Senior Development Chemist
Metalube Limited, UK
Metalube is making a big investment into the Düsseldorf show this year with the addition of the new stand at Tube 2018
Two stands for Metalube in Düsseldorf
Metalube Limited, UK
» VIEW ALL NEWS «