RSC Powder Coating Machine Model RSC

PUBLISHED: 22 May 14

RSC Powder Coating Machine Model RSC
RSC Powder Coating Machine Model RSC

The machine model RSC was designed to powder a. o. hoses, profiles, strips, bands and cables evenly, finely dosed and absolutely dust free with powders like talc, stearate, lac powder, swellable powder, graphite etc. We deliver machines for the smallest product diameters up to 200 mm and bands up to 500 mm width.

By the electrostatic charging of the powder a strong adhesive power on the product and a very even layer on the surface are reached. The electrostatic also makes sure that no powder falls from the product outside of the dusting chamber. We deliver machines with electrostatic, but also with just 2 or 4 powder nozzles depending on the application. For powdering hoses, profiles and bands made of rubber mostly the machine without electrostatic is being used.

In the machine there is a fluidised powder hopper out of which the powder is sucked by pneumatic venturi pumps and blown through the guns or nozzles onto the product. For an optimal adjustment of the powder quantity you can adjust the power of the electrostatic charging from 0-100 kV, the powder quantity and the speed of the dust cloud. Depending on the product the powder gun can be equipped with different rebounding plates.

In the machine there is a fully automatic and maintenance free filter system consisting of compact filter elements of big dimension, which are cleaned off by a special process. No blowing-in of compressed air is necessary. Thanks to this filter system a strong and constant vacuum is generated in the machine, so that no powder escapes into the ambient - guaranteed.

If there is not enough space in the line to place the machine we deliver a free standing dusting chamber which is connected to the machine by hoses. For an extremely fine powdering of slowly running products we offer as an option a fine dosing device to make sure that only a breath of powder is adhering on the strand.

As accessories you can get an automatic 90 l powder refilling hopper, a powder flow indicator giving an alarm in case no powder flows through the guns, an automatic adjustment of the electrostatic and the pneumatic in compliance with the extrusion speed, and an interface to connect the machine to the line.

Rolf Schlicht GmbH, Germany
Tel: + 49 40 679 9420

More news from this company:
Powder coating machine Model RSC
RSC Powder Coating Machine Model RSC
Rolf Schlicht GmbH at wire 2014
Rolf Schlicht at wire Russia 2013
Electrostatic powder coating machine model RSC
Electrostatic powder coating from Schlicht
Electrostatic powder coating
Electrostatic powder coating
Dust free powdering of cables