« BACK  

Maillefer at IWCS 2015

Maillefer Fiber Optic Secondary Coating Line OEL 40///Explore
Maillefer Fiber Optic Secondary Coating Line OEL 40///Explore

IWCS is an important venue for the cable and connectivity industry and we are proud to join the Suppliers' Exhibition. R&D Director Dr. Mikko Lahti welcomes you to Maillefer's booth 709 to discuss with the attending specialists about our high performance and cost effective manufacturing systems for fiber optic cables.

It has been a busy year at our new R&D Center in Finland. We have reached the ultra-high speed of 1000 m/min with the new secondary coating line OEL 40///Explore. Secondary coating is the most essential part of the fiber optic cable production process. But by considering the consistent quality of loose tube as a starting point, we were able to develop our offering to also better respond to the other requirements of the fiber optic cable production. Dr. Lahti will be available during the whole conference (Oct. 5 - 8) to discuss the results of his work and the manufacturing solutions currently available.

Three different solution levels
OEL 40/Enter: If you are considering to start fiber optic cable manufacturing, our OEL 40/Enter is a quality choice that is in range of start-up investment plans. The line speed reaches up to 300 m/min for jelly filled tubes. OEL 40/Enter is a robust, low maintenance line, with which you get maximum productivity from day one.

OEL 40//Extend: If you are interested in a high-speed, flexible secondary coating line, our OEL 40//Extend is a lean and proven solution for you. The line speed reaches up to 500 m/min and it works perfectly with both jelly-filled and dry tubes. The high quality of loose tube is ensured by Excess Fiber Length (EFL) and shrinkage control with the compression caterpillar CCA 1000.

OEL 40///Explore: If you prefer ultra-high speed production with the ability to use a variety of materials, you should choose our OEL 40///Explore. The line and its components are fine tuned for high speeds. This includes precise alignment and balancing of all rotating and moving parts. With an output of up to 1000 m/min, the line provides you with jelly filled and dry loose tubes within tight quality tolerances. EFL and shrinkage control with the CCA 1000 compression caterpillar are also included.

Booth personnel:
Mr. Mikko Lahti - Maillefer Extrusion Oy

mikko.lahti@maillefer.net

Mr. Jari Nykänen - Maillefer Extrusion Oy

jari.nykanen@maillefer.net

Mr. Kari Nieminen - KN Manufacturin Sollutions LLC (Agent)
kari.nieminen@knmsol.com

Please read more about our whole product portfolio at www.maillefer.net and latest news at blog.maillefer.net.

PUBLISHED: 07 Jul 15 Bookmark and Share
Company:
Maillefer Extrusion Oy
Visit Maillefer Extrusion Oys website
Country:
Finland
Tel:
+358 9 88 665 600
Fax:
+358 9 88 665 771
Email:
info.finland@maillefer.net
Website:
www.maillefer.net
Other News from Maillefer Extrusion Oy:

»
Maillefer at IWCS 2017
»
Maillefer at wire South America 2017
»
Thank you for visiting us at wire Russia 2017
»
Maillefer at wire Southeast Asia 2017
»
Thank you for visiting Maillefer at Interwire 2017
»
Maillefer on Booth FO/B31 at wire Russia 2017
»
Maillefer on Booth 531 at Interwire 2017
»
Maillefer to present at the UL and IWCS China 2017 Cable & Connectivity Symposium
»
Successful Seminar and W&C Show in Mumbai
»
Thank you for Visiting Maillefer at wire China 2016
»
Maillefer at IWCS 2016 - Production efficiency - the only way to success!
»
Maillefer at IWCS 2016
»
Maillefer at Wire & Cable India 2016
»
Maillefer at wire China 2016
»
A successful wire 2016 show for Maillefer
»
Maillefer on Booth 10/C22 at wire 2016
»
Maillefer News from the wire South America 2015 Show
»
Maillefer at IWCS 2015 - The future is here!
»
Maillefer at IWCS 2015
»
Maillefer at wire South America 2015
»
Maillefer at wire Southeast Asia 2015
»
Success at wire Russia 2015 - Also regarding soccer!
»
Maillefer at wire Russia 2015
»
Maillefer on Booth 932 at Interwire 2015
»
Wire & Cable Arabia established in the Middle East
»
State-of-the-art highlights from Maillefer
»
Maillefer at Wire & Cable India 2014
»
Maillefer at wire China 2014
»
Maillefer at IWCS 2014
»
Best value for different capacities and budgets
»
Maillefer's new market concept with three production solution levels was well grasped by the global market
»
Maillefer launches new solutions for the developing markets' value needs at wire 2014
»
IWCS Preview - Maillefer on booth 119
»
Subsea cables - R&D innovations for long runs
»
Maillefer at wire China 2012 exhibition
»
Subsea cables - a concept for long runs
»
Maillefer names new CEO
»
Microduct extrusion line for FTTx deployment
»
Maillefer will be exhibiting at wire China 2010
»
Time for change
»
Microcoax – thin as a human hair
»
Maillefer – from all angles!


Industry News:
Top:  MMH 101 type multiwire drawing machine; Bottom: Design of the booth which is split between the Niehoff Group and WAFIOS
Niehoff at the wire South America 2017 trade fair
Maschinenfabrik Niehoff GmbH & Co KG, Germany
Goudsmit designs and manufactures magnet assemblies for the aerospace industry that are lower in weight and perform better
Magnets for the aerospace industry
Goudsmit Magnetics Group, Netherlands
Ian Fitzgerald, Operations Director
'Emergency Service' in demand for AWI as manufacturing continues to surge
Alloy Wire International, UK
Niehoff is making changes to its management board
Change in the Niehoff management board
Maschinenfabrik Niehoff GmbH & Co KG, Germany
The exhibition floor at Wire & Cable Guangzhou
Wire & Cable Guangzhou 2017 recorded highest attendance in recent years
Guangzhou Guangya Messe Frankfurt Co Ltd, China (PR)
Maillefer Fiber Optic Secondary Coating Line OEL 40///Explore
Maillefer at IWCS 2017
Maillefer Extrusion Oy, Finland
Maillefer will be on Booth 603 at wire South America 2017
Maillefer at wire South America 2017
Maillefer Extrusion Oy, Finland
Wire coating by PDH system
Die wear - way to eliminate it
Decalub, France
CONDAT lubricants for aluminum drawing
New lubricant! Enhanced aluminum drawing
Condat SA, France
The CRU conference participants have the possibility of visiting the Niehoff headquarters in Schwabach
Niehoff and the 11th CRU Wire & Cable Conference
Maschinenfabrik Niehoff GmbH & Co KG, Germany
» VIEW ALL NEWS «