« BACK  

New developments at wire Düsseldorf

Condat's lubricant range is recognized as a world reference in the metal forming market, especially for wire drawing processes.
Condat's lubricant range is recognized as a world reference in the metal forming market, especially for wire drawing processes.

With 160 years of expertise, Condat's lubricant range is recognized as a world reference in the metal forming market, especially for wire drawing processes (mechanical and electrical wire). Its VICAFIL and STEELSKIN range gathers together the widest choice of wire drawing soaps, surface treatment, neat and soluble oils, degreasing products,...

At wire Düsseldorf, Condat will exhibit its new developments for safer lubricants for both operators and the environment, such as:

  • For high carbon steel, Steelcord, Spring wire, Ropes, PC strand : wire dry drawing lubricants with low or zero Borax (sodium tetraborate pentahydrate): VICAFIL SUMAC 5 and VICAFIL SANTALE 6
  • For low carbon steel, wire to be galvanized, CO2 welding: minimizing the use of titanium dioxide in dry drawing lubricants: VICAFIL DECAL 440
  • For stainless steel Spring wire, Cold heading wire: Products with new formulations in its range of drawing oils and greases so that they are not labeled under the GHS regulations and avoid the use of of short and medium chain length chlorinated paraffins.

Condat proposes whenever possible low HSE impact technologies, using formulations with least severe labelling possible.

The show will also be the opportunity to highlight Condat's specific offer for ELECTRICAL WIRE & CABLE, including:

  • For Aluminum Wire drawing, VICAFIL™ TFA neat oils range. They have been designed to offer both low residues and extended operating life. Its specifically formulated additives package minimizes thermal oxidation, maintaining longer lubricant performance. The bath life is increased and maintenance costs reduced.
  • For the drawing of Bare Copper Wires, VICAFIL™ TCU concentrated soluble lubricants. They provide consistent and reliable performance. The high lubricity of the emulsions reduces wire breakage while the additives package has been formulated to keep the machine clean, reduce foaming and increase the emulsion stability.
  • A full range of complementary products that helps you in the management of the bath. Including products to clean your installations, bath maintenance additives as well as protection products for bare wires in order to avoid corrosion and extend shelf life.

Discover the complete range of mechanical and electrical wire lubricants on booth 10 A52 or contact the Condat team at wire@condat.fr.

PUBLISHED: 06 Jan 16 Bookmark and Share
Company:
Condat SA
Visit Condat SAs website
Country:
France
Tel:
+33 478 073711
Fax:
+33 478 073539
Email:
info@condat.fr
Website:
www.condat.fr
Other News from Condat SA:

»
New lubricant! Enhanced aluminum drawing
»
Higher drawing stability with VICAFIL SENJA
»
Advanced lubricants for aluminum wire drawing
»
Solutions for electrical wire drawing
»
New developments at wire Düsseldorf
»
'Responsible' lubricants
»
Condat at wire Southeast ASIA 2015
»
Condat at wire South America 2015
»
Condat at Interwire 2015
»
Condat at wire China 2014
»
How to minimise dust in wiredrawing workshops?
»
Stop phosphatation! The Condat solution: without borax, without phosphate
»
Condat at wire Southeast ASIA 2013
»
Condat at wire China 2012
»
Sustainable, high performance lubricants
»
Condat to exhibit at WiCAB 2011
»
Condat to exhibit at wire Southeast ASIA 2011
»
A new Borax free alternative
»
Condat at Interwire 2011
»
Environment and operator-friendly lubrication
»
Condat at wire China 2010
»
Putting borax out of REACH
»
Technological excellence & eco-friendly lubricants
»
The continuing development of dry lubrication
»
New moves to lower borax
»
Condat at wire China 2008


Industry News:
Top:  MMH 101 type multiwire drawing machine; Bottom: Design of the booth which is split between the Niehoff Group and WAFIOS
Niehoff at the wire South America 2017 trade fair
Maschinenfabrik Niehoff GmbH & Co KG, Germany
Goudsmit designs and manufactures magnet assemblies for the aerospace industry that are lower in weight and perform better
Magnets for the aerospace industry
Goudsmit Magnetics Group, Netherlands
Ian Fitzgerald, Operations Director
'Emergency Service' in demand for AWI as manufacturing continues to surge
Alloy Wire International, UK
Niehoff is making changes to its management board
Change in the Niehoff management board
Maschinenfabrik Niehoff GmbH & Co KG, Germany
The exhibition floor at Wire & Cable Guangzhou
Wire & Cable Guangzhou 2017 recorded highest attendance in recent years
Guangzhou Guangya Messe Frankfurt Co Ltd, China (PR)
Maillefer Fiber Optic Secondary Coating Line OEL 40///Explore
Maillefer at IWCS 2017
Maillefer Extrusion Oy, Finland
Maillefer will be on Booth 603 at wire South America 2017
Maillefer at wire South America 2017
Maillefer Extrusion Oy, Finland
Wire coating by PDH system
Die wear - way to eliminate it
Decalub, France
CONDAT lubricants for aluminum drawing
New lubricant! Enhanced aluminum drawing
Condat SA, France
The CRU conference participants have the possibility of visiting the Niehoff headquarters in Schwabach
Niehoff and the 11th CRU Wire & Cable Conference
Maschinenfabrik Niehoff GmbH & Co KG, Germany
» VIEW ALL NEWS «