« BACK  

Smooth conveying of sharp steel parts

Magnetic slide conveyor
Magnetic slide conveyor

At Euroblech in Hannover Goudsmit Magnetics Group (Stand 12 - B153) from Waalre, the Netherlands present a magnetic slide conveyor. These are used in the metal and sheet metal processing industry. They offer the right solution for the smooth transport of steel parts such as: punching waste, pressing scrap, trim waste, ball bearings, nails, turning, milling and drilling swarf and other steel parts.

Slide conveyors have no external moving parts such as plastic conveyor belts. This makes them especially well suited for transporting sharp steel parts. They are trustworthy and safe, require minimal installation space and require little to no maintenance.

A stationary stainless steel slide plate is mounted above magnet systems mounted at intervals along a chain. This chain is driven by a gear reduction motor that sets the magnet systems in motion. The magnets move the steel parts along the slide plate and smoothly carry them to the discharge end.

The magnetic slide conveyor offers several advantages with regard to other conveyors; it requires minimal installation space, contains no external rotating parts and therefore conveying belts don’t have to be replaced. The conveyor has a steep transport angle of 60°, is completely dust and liquid proof and suitable for use in an oil- or water bath. This makes it suitable for oiled and abrasive products. The magnetic conveyor can be delivered in any desired dimension.

PUBLISHED: 07 Jul 16 Bookmark and Share
Goudsmit Magnetics Group
+31 40 221 3283
+31 N/A
Other News from Goudsmit Magnetics Group:

Magnetic power gripper handles heavy steel parts
Magnet filters iron particles as small as one micron from industrial fluids
Magnets for the aerospace industry
AS9100C certification for Goudsmit Magnetics
Powerful magnets help to prevent gaps and holes in steel walls and ceilings
Smooth conveying of sharp steel parts
Magnet for robot grippers
Demagnetization on location

Industry News:
Andrew Botfield (Fine Wire Drawing Technician) and Janet Smith (Wire Annealing Technician)
AWI brings its largest ever range of Nickel Alloys to Wire 2018
Alloy Wire International, UK
Cimteq launches new website
Cimteq launches new website
Cimteq Ltd, UK
Roteq Machinery Inc. will be exhibiting wire 2018 on Booth 9B21
Roteq Machinery Inc. to exhibit at wire 2018 in Duüsseldorf
Roteq Machinery Inc, Canada
Wire rod coating by PDH system
Rod PDH coating - the new world of wire drawing
Decalub, France
Fully Automatic Dual Takeup with the unique Robot Handling System
MGS Group at Wire Expo 2018
Northampton Machinery Co Ltd (MGS Group), UK
Fully Automatic Dual Takeup with the unique Robot Handling System
The MGS Group at wire 2018
Northampton Machinery Co Ltd (MGS Group), UK
Top: The latest cable compound innovations will be on the H&R stand - A62 12 at Wire 2018; Bottom: Mineral and synthetic thixotropic gels - developed for loose tube optical fibre telecommunication cable flooding applications
Looking for a solution to a cabling challenge?
H&R ChemPharm (UK) Ltd, UK
David Purvis - Global Product Manager
Global Product Manager joins Metalube team
Metalube Limited, UK
Martin Van Der Zwan is the new Chairman of the IWMA
Martin Van Der Zwan is the new Chairman of the IWMA!
Cable Tapes UK, UK
Cimteq Ltd will be exhibiting at wire 2018 on stand 11D15
Cimteq Ltd at wire 2018 Düsseldorf
Cimteq Ltd, UK